When ORDERING any 85 or 90 degree Punch you must specify
the desired ANGLE & NOSE RADIUS from the chart below;
which will determine the ACTUAL NET HEIGHT.
EXAMPLE= UFP58-90deg-.031
| OVERALL PUNCH HEIGHT TO SHARP | ||||||
|---|---|---|---|---|---|---|
| 3.600 | 4.100 | 5.100 | ||||
| ANGLE | 85deg | 90deg | 85deg | 90deg | 85deg | 90deg |
| RADIUS | ACTUAL NET HEIGHT | |||||
| .005 | 3.598 | 3.598 | 4.098 | 4.098 | 5.098 | 5.098 |
| .015 | 3.593 | 3.594 | 4.093 | 4.094 | 5.093 | 5.094 |
| .031 | 3.585 | 3.587 | 4.085 | 4.087 | 5.085 | 5.087 |
| .062 | 3.570 | 3.574 | 4.070 | 4.074 | 5.070 | 5.074 |
| .093 | 3.555 | 3.561 | 4.055 | 4.061 | 5.055 | 5.061 |
| .125 | 3.540 | 3.548 | 4.040 | 4.048 | 5.040 | 5.048 |
| .187 | 3.510 | 4.010 | 5.010 | |||
| .250 | 3.480 | 3.980 | 4.980 | |||